3D-Fuel Pro PETG Filament | 1.75mm | Made in USA

American-Made PETG. Precision-Manufactured. Print-Ready.

3D-Fuel Pro PETG is a premium 3D printing filament manufactured in 3D-Fuel's own production facility in Fargo, North Dakota — with complete control over every step of the process, from raw material to finished spool. Made from 100% virgin PETG resin, it delivers the ideal balance between ease of printing and real-world performance: the approachability of PLA with the strength, temperature resistance, and impact toughness of ABS.

Where standard PETG can be finicky, Pro PETG is dialed in. Near-zero warpage. Extremely strong layer bonds. Little to no odor during printing. And because 3D-Fuel runs multi-axis laser diameter and ovality measurement in real-time during production, every spool ships with the exact diameter and ovality readings printed right on the box — so you know what you're loading before you print.

Note: Pro PETG prints a little hotter than some PETG filaments. See the recommended settings below and dial in from there.

Built for makers who need performance and reliability — perfect for:

• Functional parts, enclosures, brackets, and mechanical components requiring strength beyond PLA
• Outdoor and high-heat applications where standard PLA would soften or fail
• Waterproof and moisture-resistant prints — bottles, containers, and fluid-contact parts
• Structural assemblies, load-bearing brackets, and snap-fit components
• RC car and drone bodies, robotics housings, and protective casings
• Engineering prototypes where both toughness and print quality matter
• Any project where near-zero warpage is non-negotiable

Available in 1kg and 4kg spools — choose your spool size when adding to cart.

Printer Compatibility: Compatible with most 1.75mm FDM 3D printers. Tested in-house on MakerBot, LulzBot, FlashForge, and more.

Key Properties

• Material: PETG (Polyethylene Terephthalate Glycol) — 100% virgin resin
• Origin: Made in the USA — 3D-Fuel production facility, Fargo, North Dakota
• Diameter: 1.75mm
• Diameter Tolerance: Laser-measured and ovality-controlled during production — exact measurements printed on box
• Print Temperature: 245–265°C (prints hotter than most PETG — start at 245°C and adjust)
• Bed Temperature: 70–90°C
• Spool Options: 1kg / 4kg
• Key Strengths: Near-zero warpage, strong layer adhesion, little to no odor, high impact resistance, temperature resistant
• Packaging: Vacuum-sealed with a desiccant packet to prevent moisture absorption
• Quality Control: Multi-axis laser diameter and ovality measurement in real-time during production
• Compatibility: Most 1.75mm FDM 3D printers