3D-Fuel Pro PETG Filament | Olive Green | 1.75mm | Made in USA

American-Made PETG. Precision-Manufactured. Print-Ready.

3D-Fuel Pro PETG Olive Green is a premium 3D printing filament manufactured in 3D-Fuel's own production facility in Fargo, North Dakota — with complete control over every step of the process, from raw material to finished spool. Made from 100% virgin PETG resin, it delivers the ideal balance between ease of printing and real-world performance: the approachability of PLA with the strength, temperature resistance, and impact toughness of ABS.

Olive Green is the natural choice for outdoor, tactical, and nature-themed projects — a muted, earthy tone that blends in where bold colors stand out. It prints with near-zero warpage, extremely strong layer bonds, and little to no odor, making it as reliable as it is distinctive. And because 3D-Fuel runs multi-axis laser diameter and ovality measurement in real-time during production, every spool ships with the exact diameter and ovality readings printed right on the box.

Note: Pro PETG prints a little hotter than some PETG filaments. See the recommended settings below and dial in from there.

Built for makers who need performance and a distinctive finish — perfect for:

• Outdoor gear, equipment mounts, and weatherproof enclosures
• Tactical accessories, tool holders, and utility components
• Nature and terrain-themed models, miniatures, and dioramas
• RC vehicle bodies, drone frames, and off-road component covers
• Functional parts requiring PETG toughness in a low-visibility, earthy finish
• Cosplay props and accessories with a military or survival aesthetic
• Garden tools, plant markers, and outdoor fixtures requiring UV and heat resistance

Printer Compatibility: Compatible with most 1.75mm FDM 3D printers. Tested in-house on MakerBot, LulzBot, FlashForge, and more.

Key Properties

• Material: PETG (Polyethylene Terephthalate Glycol) — 100% virgin resin
• Color: Olive Green
• Origin: Made in the USA — 3D-Fuel production facility, Fargo, North Dakota
• Diameter: 1.75mm
• Diameter Tolerance: Laser-measured and ovality-controlled during production — exact measurements printed on box
• Print Temperature: 245–265°C (prints hotter than most PETG — start at 245°C and adjust)
• Bed Temperature: 70–90°C
• Spool Weight: 1kg (2.2lbs)
• Key Strengths: Near-zero warpage, strong layer adhesion, little to no odor, high impact resistance, temperature resistant
• Packaging: Vacuum-sealed with a desiccant packet to prevent moisture absorption
• Quality Control: Multi-axis laser diameter and ovality measurement in real-time during production
• Compatibility: Most 1.75mm FDM 3D printers